Led Lamp Cord Suppliers

What We Manufacture in the Lamp Cord Range

Our lamp cord range covers the flexible wiring used between a lamp, string light set or lighting fixture and its power source. Depending on the project, this can be a two-core or multi-core cord with moulded or assembled terminations, a socket-ready string light wire, or a custom length supplied to a drawing or sample.

We produce lighting components alongside our power cord and new energy wire lines. That shared manufacturing base matters when a lighting product needs a specific conductor size, jacket material or end fitting: we can develop the cord and the mating plug or connector as one coordinated item.

Where Lamp Cord Fits in the Lighting Range

Lamp cord sits between the fixture and the supply. In our catalogue it supports three practical applications: connecting a lamp or luminaire to a wall outlet, wiring individual lamp holders in a temporary string light run, and providing a flexible tail for LED work lights and similar portable fixtures.

• Luminaire supply cords — flexible cord with a moulded plug or an open end for field termination inside the fixture.
• String light wiring — lamp holder spacing, socket type and overall run length are set by the lighting layout.
• LED work light leads — shorter, heavier-service cords where strain relief and jacket toughness matter.
• Custom lighting assemblies — cord, socket, switch and plug combined to a customer drawing or sample.

Technical Scope and Configuration Options

Lamp cord is specified by electrical rating, mechanical construction and termination. We confirm these variables against the end product and the destination market before quoting, because a cord that suits a decorative indoor lamp is not the same construction as one used on a temporary outdoor lighting run.

Materials, Safety and Compliance

Lamp cord is a safety component. We build lighting wiring from stranded copper conductors and insulating compounds selected for the electrical load, the operating temperature and the mechanical handling the cord will see. Where a project requires a certified construction, we align the cord with the relevant plug and connector family so the assembly can be assessed as a complete unit.

Our manufacturing operates under an ISO 9001 quality management system, and our product programme holds c(UL)us, ETL and CE safety certifications. Compliance evidence for the specific lamp cord construction is confirmed at the quotation stage, because the applicable standard depends on the plug type, the intended market and the end product.

Manufacturing and Quality Control

Zhenjia was established in 2006 and operates its own overseas manufacturing base of 35,000 square metres, alongside a 10,000+ square metre domestic factory area. The facility runs end-to-end processes for our core lines, including automated assembly and precision testing systems, so lighting wiring is produced under the same controls as our power cords and EV charging cables.

We maintain our own granulation and processing plant, which gives us control over the insulating compound used in the cord. In-house testing equipment is used to check the electrical and mechanical characteristics of production lots before they are packed. This is the basis on which we can hold a lamp cord specification stable across repeat orders.

Custom Development and OEM Support

Our R&D team develops and produces lighting wiring to customer drawings or samples. For a custom lamp cord, the starting point is usually the end product: the lamp or light set, the load it draws, the plug it needs and the way the cord will be handled and installed.

We can combine lamp cord with sockets, switches and plugs from our broader range, including Connector Type power cord and regional formats such as US Power Cord, so that a lighting assembly arrives as one coordinated item rather than a collection of separately sourced parts.

Information We Use to Configure Your Solution

To prepare a lamp cord configuration and quotation, we work from the following project inputs. The more precisely these are defined, the faster we can confirm construction, tooling and price.

• End product type — table lamp, floor lamp, string light set, work light or other luminaire.
• Electrical rating — voltage, current and total load per cord or per lighting run.
• Conductor and core count — two-core, three-core or multi-core, with or without earth.
• Insulation and jacket material, colour and surface finish.
• Termination — moulded plug, open end, socket, switch or connector, and the plug standard required.
• Length, tolerance and packing format — cut length, coil, reel or assembled set.
• Destination market and the compliance evidence needed for that market.
• Marking, printing, labelling and retail packaging requirements.
• Order quantity, repeat schedule and any sample or drawing to be matched.

Installation, Maintenance and Serviceability

Lamp cord is normally installed by the fixture or lighting set manufacturer, so our focus is on making the cord easy to route, terminate and strain-relieve in production. Moulded terminations reduce assembly steps, while open-ended cords give the fixture builder freedom to terminate inside the housing.

For maintenance, the practical considerations are jacket durability, resistance to repeated flexing and the availability of matching replacement cords. We keep the construction records for supplied lamp cord so that repeat orders and spare lengths can be produced to the same specification.

Packaging, Documentation and Delivery Scope

Lamp cord is packed to protect the conductors and terminations during transport, with coil, reel or carton formats selected to suit the customer's production line. Documentation follows the agreed specification: construction details, compliance evidence where applicable, and packing information for the shipment.

Our products are exported to Europe, America and other international markets. We confirm the delivery scope, packing method and documentation set as part of the order confirmation, so that the receiving plant knows exactly what will arrive and how it will be presented.

Frequently Asked Questions

Can you produce lamp cord to our own drawing or sample?

Yes. Our R&D team develops and produces lighting wiring from customer drawings or samples. Send the construction details, the end product and the required plug standard, and we will confirm the build and the tooling needed.

Do you supply lamp cord with moulded plugs?

We can supply lamp cord with moulded plugs, open ends, sockets or switches. Because we also manufacture power cords in US, UK and EU formats, the plug can be matched to the destination market as part of the same order.

What compliance evidence is available for lamp cord?

Our product programme holds c(UL)us, ETL and CE safety certifications, and our manufacturing operates under ISO 9001. The applicable evidence for a specific lamp cord construction is confirmed with the quotation, based on the plug type and the target market.

Can lamp cord be combined with string light sockets and wiring?

Yes. We produce temporary string lights and string light sockets and wiring as part of our lighting components line. A complete string light set can be configured with the cord, sockets and plug as one coordinated assembly.

How do you control quality on repeat lamp cord orders?

We keep construction records for supplied lamp cord and produce repeat orders to the same specification. In-house testing equipment checks production lots, and our granulation plant gives us control over the insulating compound used in the cord.

What information do you need to quote a custom lamp cord?

We need the end product, electrical rating, conductor and core count, insulation material, termination type, length, packing format, destination market and order quantity. A drawing or sample helps us confirm the construction precisely.