EU Power Cord Suppliers

What We Supply in the EU Power Cord Range

Our EU Power Cord family is built around the plug and connector interfaces used across European domestic and commercial equipment. Each assembly is produced to the drawing or sample supplied by the customer, with conductor size, jacket material, length and termination selected to match the appliance rating and the destination market.

We manufacture the full cord set, not just the plug: moulded or rewireable plugs, cable, strain relief, ferrules and connectors are assembled and tested as one unit. This lets us control pull strength, polarity and continuity from the first process to final inspection.

Available Configurations

• CEE 7/7 Schuko (Type F) plugs — straight or 90° angled, 2-prong, for appliances and power distribution units.
• French/German Type E plugs — 2-prong European extension cords for PDU, UPS and office equipment.
• IEC C13 / C14 connectors — for IT, server, printer and instrument power leads.
• 2-slot and 2-prong variants — compact plugs for printers, chargers and small appliances.
• Angled and straight moulded plugs — 90° versions for wall-clearance and cabinet installations.

Product Range at a Glance

The table below shows the main EU Power Cord models we produce and the applications they are normally specified for. Custom lengths, colours and packaging are available across the range.

Application Fit Across Equipment Types

EU Power Cords are not a single product — the correct assembly depends on the equipment current, the socket environment and the mechanical load on the cable. We match the cord set to the application rather than supplying a generic lead.

• Domestic appliances — washing machines, dryers, refrigerators and small kitchen equipment, where strain relief and jacket durability matter.
• IT and data equipment — servers, PDUs, UPS units and printers, normally with IEC C13/C14 connectors and defined conductor sizes.
• Lighting and decorative products — lamp cords and string-light wiring, where flexible cable and compact plugs are preferred.
• Commercial and industrial equipment — tools, compressors and control cabinets requiring heavier gauge conductors and robust moulded plugs.

Materials, Specifications and Customization

We select conductor, insulation and jacket materials to suit the working environment and the customer's compliance target. PVC and rubber compounds are available, and our own granulation plant lets us control compound consistency across production runs.

Typical specification variables we confirm before production include:

• Conductor size and core count — matched to the appliance current rating and voltage drop over the required length.
• Plug and connector type — Schuko, Type E, CEE 7/7, IEC C13/C14 or customer-specified interface.
• Cable length and colour — produced to the customer's drawing, including non-standard lengths.
• Jacket material and hardness — selected for flexibility, abrasion resistance or high-temperature service.
• Termination — moulded, rewireable, stripped and tinned, or fitted with ferrules and housings.
• Marking and packaging — printed ratings, customer branding, poly bag, blister or bulk carton.

Our R&D team develops new assemblies from customer drawings or physical samples, so a non-standard EU Power Cord can be engineered rather than adapted from a catalogue item.

Quality Control and Acceptance

Production runs under an ISO 9001 quality management system, with inspection at incoming material, assembly and final test. Our in-house testing laboratory and inspection equipment allow us to verify the electrical and mechanical characteristics that matter for cord sets.

• Continuity and polarity checks — confirming correct L/N/E mapping on every assembly.
• High-voltage and insulation testing — dielectric strength and insulation resistance verification.
• Pull and strain-relief testing — confirming the moulded joint withstands the specified axial load.
• Visual and dimensional inspection — plug geometry, cable marking, length and finish.

Compliance documentation is available for the relevant product families, including CE alignment and the compliance certificates held for our power cord and adapter lines. Acceptance criteria and sampling plans are agreed with the customer before the first shipment.

Related Product Families

EU Power Cords sit within a broader electrical connection range produced at the same facilities. Customers building a complete programme often combine several families in one order.

Information We Use to Configure Your Solution

To prepare an accurate EU Power Cord proposal, we need the following project inputs. Where a detail is not yet fixed, we can propose a standard configuration for review.

Manufacturing, Documentation and Support

Ningbo Zhenjia operates as a China EU Power Cord manufacturer with production capacity across our Ningbo base and our 35,000 m² overseas factory in Cambodia. The overseas facility runs the same ISO 9001 quality system and produces power cords, adapters and EV charging components for global markets.

For each order we provide the agreed technical drawing, inspection records and compliance documentation. Product manuals and installation guidance are available, and our sales and engineering teams support customers through sample approval, first article inspection and repeat production.

Spare parts and replacement components are supplied for the connectors and plugs used in our assemblies, and we keep production records so that repeat orders match the original specification.

Frequently Asked Questions

What EU plug types can you manufacture?

We produce CEE 7/7 Schuko, French/German Type E, 2-prong and 2-slot European plugs, combined with IEC C13/C14 connectors or bare-end terminations. Custom plug geometries can be developed from a drawing or sample.

Can you supply EU Power Cords with custom lengths and colours?

Yes. Length, colour, jacket material and conductor size are specified per order. Because we control granulation and processing in-house, non-standard colours and compounds can be produced without relying on external compound suppliers.

What testing is performed on each EU Power Cord?

Assemblies pass continuity and polarity checks, high-voltage and insulation testing, pull and strain-relief testing, and visual and dimensional inspection. Sampling plans and acceptance criteria are agreed with the customer before production.

Do you provide compliance documentation for European markets?

We hold compliance certificates for our power cord and adapter lines and align production with CE requirements. The relevant documentation is issued with the order according to the product family and the customer's market.

Can you develop a new EU Power Cord from our sample?

Our R&D team develops and produces products from customer drawings or physical samples. Send the sample or drawing with the target current, length and packaging requirements, and we will prepare a configuration and quotation.

Where are your EU Power Cords manufactured?

Production takes place at our Ningbo facility and at our overseas manufacturing base in Cambodia. Both sites operate under the same ISO 9001 quality management system, so quality remains consistent regardless of origin.